HS1 & HS1R
For both processes: cold
process and room temperature process.
research is proud to presents you our silicone polymer HS1 for biological
take part of a big family of silicone polymers ideated by VisDocta® Research
and classified as a “general purpose” impregnate medium.
is pure, clear, odourless and does not contain any additive, those physical and
chemical distinctive make it your best choice polymer to fill within your
silicone impregnation baths.
polymer HS1 was specifically developed to impregnate any type of biological
tissue, giving you excellent results from your first approach.
curing of HS1 polymer is extremely easy and done by the combination of HS1D/S3
and HS1G/S6, it is an easy to use procedure that will give you an odourless and
transparent impregnation solution for your specimens.
long pot life, over 12 months of the basic mixture HS1 and HS1D/S3 can be
obtained if kept at low temperature.
low viscosity 1000cps at 25°C and transparently permit a deep tissue
penetration and a clear observation later on.
** A FULL DATASHEET CAN BE FOUND AT THE DOWNLOAD
Epoxy Epoxy that don't became yellow EP73 Polyester Latex Cast corrosion Colouring agents: Liquid, pasta or powders.Solvents
And much more …
Note: we use only high quality raw materials and polymers (when they are polymerized they are dry not oily or sticky).
Our chemical division provide a large selection of substances mixed to different grade of viscosity.
WE CAN SUPPLY SMALL AND LARGE AMOUNTS OF CHEMICAL SUBSTANCES.